Mittler Bros Machine & Tool 204-36 - Manual (Page 4)

- 4 -
MACHINE SET UP
Floor Stand Assembly Instructions
1.
Remove machine from packaging.
2. Assemble stand by installing 1/2-13 socket head cap screw (SHCS) through the bottom
of the H-frame or caster base plate.
3. Install 2) 5/16-18 bolts through top of gusset.
4. Install rigid casters on back of base plate.
5. Install swivel casters on front of base plate.
6. Place machine on top of the bead roller stand and secure using (2) 3/8-16 x 1”
socket head cap screws.
Stationary Floor Stand Assembly
#200-031
1/2 -13 SHCS thru
Stand Bottom
5/16-18 Bolts thru
Gusset Top
3/8-16 SHCS Bolts To
Secure Stand To Bead
Roller Frame From Side
Bead Roller Frame