Sound adjustments, Adjustments, Volume – Aiwa XR-EC10 User Manual

Page 11: Bass and treble

Advertising
background image

11

En

Adjustments

To switch to monaural FM reception
Hold down SHIFT and press TUNER MODE on the remote
control so that "MONO" is displayed.
To cancel, repeat the above so that “STEREO” is displayed.

Tip:
When FM stereo reception is poor, switching to monaural
reduces noise.

To switch the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation
system is 9 kHz/step, change the tuning interval.
Hold down TUNER/BAND and press POWER on the main unit.

Tip:
When the AM tuning interval is changed, all preset stations
are cleared.

SOUND ADJUSTMENTS

Volume

Turn VOLUME (press VOLUME +,- on the remote
control).
Adjust from 0 (minimum) to 41 and MAX (maximum).

Tip:
Volume level setting is retained during power-off standby. If
the unit is turned off with the volume set to 25 or higher, it is
automatically turned down to 24 the next time the unit is turned
on.

Bass and treble

Turn BASS or TREBLE.
The bass or treble level can be adjusted from “–5” to “+5”.

To operate on the remote control
1 Press TONE repeatedly to display “BAS” or “TRE”.
2 Within 6 seconds, press f or g.

• If the sound becomes distorted, lower the level.

BASS,
TREBLE

f

,

g

TONE

VOLUME

+

,

-

VOLUME

01_10_15_XREC10_UC_En

02.3.15, 7:11 PM

11

Advertising
This manual is related to the following products: