General power tool safety warnings, Specification, Description of symbols – Silverline Air Micro Grinder Kit User Manual

Page 5

Advertising
background image

Carefully read and understand this manual and any label attached to
the tool before use. Keep these instructions with the product for future
reference. Ensure all persons who use this product are fully acquainted
with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe
manner in which to use this tool, do not attempt to use it.

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric shock, fire and/

or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

Work Area Safety

a)

Keep work area clean and well lit. Cluttered or dark areas invite

accidents

b)

Do not operate power tools in explosive atmospheres, such as

in the presence of flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes

c)

Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control

Personal Safety

a)

Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while you

are tired or under the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in

serious personal injury

b)

Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard

hat, or hearing protection used for appropriate conditions will reduce

personal injuries

c)

Prevent unintentional starting. Ensure the switch is in the

off-position before connecting to power source and/or battery

pack, picking up or carrying the tool. Carrying power tools with your

finger on the switch or energising power tools that have the switch on

invites accidents

d)

Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of the power

tool may result in personal injury

e)

Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations

f)

Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts

g)

If devices are provided for the connection of dust extraction

and collection facilities, ensure these are connected and properly

used. Use of dust collection can reduce dust-related hazards

Power Tool Use & Care

a)

Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed

b)

Do not use the power tool if the switch does not turn it on and off.
Any power tool that cannot be controlled with the switch is dangerous

and must be repaired

c)

Disconnect the plug from the power source and/or the battery

pack from the power tool before making any adjustments,

changing accessories, or storing power tools. Such preventive

safety measures reduce the risk of starting the power tool accidentally

d)

Store idle power tools out of the reach of children and do

not allow persons unfamiliar with the power tool or these

instructions to operate the power tool. Power tools are dangerous

in the hands of untrained users

4

GB

Specification

Working pressure: ..............................90psi

Air consumption: ..................................4CFM

Air inlet: ................................................

1

4

" BSP

No load speed: ......................................56000rpm

As part of our ongoing product development,

specifications of Silverline products may alter without

notice.

Description of Symbols

The rating plate on your tool may show symbols. These represent important
information about the product or instructions on its use.

Wear hearing protection
Wear eye protection.
Wear breathing protection
Wear head protection

Wear hand protection

Read instruction Manual

633630_Z1MANPRO1.indd 4

29/11/2012 16:42

Advertising