BrandTech Scientific Dispensette TA - Manual (Page 31)

7
5
6
English
First Steps
6.
Mounting and
aligning the instru-
ment on a bottle
Note:
5.
Mounting the
filling tube and
recirculation tube
For bottles with other thread sizes, select a suitable adapter. The
adapters supplied with the instrument are made of ETFE and PTFE.
Screw the instrument (GL 45 thread)
onto the reagent bottle and then align
the discharge tube with the bottle label
by turning the valve block (Fig. 6). To
prevent tipping over use a bottle stand
for small bottles.
Adjust the length of the telescoping fill-
ing tube to the bottle height and attach
it. If a SafetyPrime
™ recirculation valve
(optional) is used, the recirculation tube
must also be mounted. Insert the recir-
culation tube with the opening pointing
outward (Fig. 5).
7.
Transporting the
instrument
When mounted to a reagent bottle,
always carry the instrument as shown in
the figure (Fig. 7)!
31
Always wear protective gloves when
touching the instrument or the bottle,
especially when using dangerous liquids
(e.g. HF).
Warning: