DOCTER DOCTER®unipoint 3-12x56 - Manual (Page 15)

Accessories
Interconnected protective caps are supplied for protecting the external optical parts.
For protection from side light, a rubber light protection cover can be supplied if desired
that at the same time ensures the correct eye distance of the eye from the ocular and
damps out any recoil.
Maintenance
With careful handling, the life of the DOCTER  unipoint is practically unlimited.
The device should be protected from much soiling.
The optical surfaces should occasionally be cleaned with a soft, clean cloth or fine brush
– do not use chemical solvents.
Strong dirt should be removed with distilled water otherwise lime deposits can form on
the surfaces.
Attention is drawn to the fact that the removal of parts of the rifle scope can lead to the
loss of watertightness and the loss of the nitrogen filling of the device.
In the case of any malfunctions or damage the device must be returned to an authorized
servicing workshop.