Graymills Super Sonic OMI - Manual (Page 6)

- 6 -
TIMERS SCREEN
(Figure 5)
The TIMERS SCREEN allows the operator the ability
to set the duration of the four functions used in the
cleaning cycles. The four functions are:
• ULTRASONICS – Sound generators
• SPARGER – Cleaning the surface
• OSCILLATION – Up and down motion
• SOAK – No motion
TIMERS SCREEN BUTTONS:
• MINUTES and SECONDS – If user presses
either the minutes or seconds for any of the
four functions, the operator is prompted to
enter a new timer value on a keypad. (Minutes
and seconds are set separately.)
• HOME – Takes the user back to the HOME
SCREEN
SETTING THE TIMERS:
(Figure 5a)
1. Press either the minutes or seconds for any of
the four functions.
2. A keypad will be displayed. (Figure 5a)
3. Enter new values and press ENTER to save.
4. Press CANCEL to retain old data and return to
the TIMERS SCREEN.
24/7 TIMERS SCREEN
(Figure 6)
The 24/7 TIMERS SCREEN allows the operator the
ability to set the hours of the day in which the skimmer
and heater operate as well as setting the current date
and time.
24/7 TIMERS SCREEN BUTTONS:
• SKIMMER 24/7 TIMERS – Takes the operator
to the skimmer settings page
• HEATER 24/7 TIMERS – Takes the operator
to the heater settings page
• SET TIME – Causes a screen to appear which
allows the operator to set the date and time.
Once set, this information is kept up to date by
an internal battery, even when power is turned
off. The time must be reset for daylight savings
time clock changes and time zone changes,
when the machine is moved.
SETTING 24/7 TIMERS:
(Figure 6a)
Skimmer and Heater 24/7 timers are set by means of
screens as described below. Screens are identical for
skimmer and heater functions, except for title at top of
screen.
First screen entered is the day-of-the-week screen.
Each day-of-the-week button takes the user to a
screen like that shown above (in Figure 6a).
The next screen entered is for setting 24/7 timer output
turn-on and turn-off times for a particular day. It has