Graymills Super Sonic OMI - Manual (Page 7)

- 7 -
hour and minute buttons that call up keypads (see
Figure 5a) for entering time, based on a 24-hour clock.
EXAMPLES:
4:00 AM is 04:00
4:00 PM is 16:00
12:00 AM is 00:00 – can be used to
indicate either the beginning or end of
the day.
There is an ENABLE toggle button, which turns ON the
skimmer or heater’s 24/7 timer output at the time
shown next to “ON.” When the ENABLE button is
activated, its color turns from dark to light. When
ENABLE is not activated, nothing happens at the time
shown next to “ON.” The skimmer or heater 24/7 timer
output is always turned off at the time next to “OFF.”
BACK returns the user to the day-of-the-week screen.
24/7 TIMER SETTING EXAMPLE:
To set a 24/7 timer output to go ON at 10:00 PM on
Tuesday and OFF at 6:00 AM on Wednesday, do the
following:
1. Press the SKIMMER 24/7 TIMERS button.
2. Select TUE.
3. On the Tuesday screen, Set the ON time to
22:00 and activate the ENABLE button. Verify
that the OFF time is set to some time earlier
than 22:00, such as 21:45.
4. Select WED.
5. On the Wednesday screen, set the OFF time
to 06:00. Verify that the ON time is set to
some time later than 06:00, such as 20:30, or
deactivate the ENABLE button.
MANUAL SCREEN
The two MANUAL SCREENS have buttons for turning
ON and OFF various functions and for raising and
lowering the lid and the lift platform.
Each of the two screens has a button that takes the
user to the other screen. The HOME button, in the
lower right corner of the screen, takes the user back to
the HOME screen and turns OFF any function that was
turned ON. The HOME button does not affect the
position of the lid or the lift platform.
(Figure 7a – MANUAL OPERATION SETTINGS 1)
MANUAL OPERATION SETTINGS 1 FUNCTIONS:
• HEAT CONTINUOUS – When toggled ON, this
button causes the heater to go ON, if the water
temperature is less than the set temperature.
This will operate the heater even if the heater
24/7 timer has turned the heater OFF. When
this button is toggled OFF, the heater 24/7
timer will resume control.
• SKIM CONTINUOUS – When toggled ON, this
button causes the skimmer to go ON. This will
operate the skimmer even if the skimmer 24/7
timer has turned the skimmer OFF. When this
button is toggled OFF, the skimmer 24/7 timer
will resume control.
• SPARGER CONTINOUS – When toggled ON,
this button causes the sparger to run
continuously.
(Figure 7b – MANUAL OPERATION SETTINGS 2)
MANUAL OPERATION SETTINGS 2 FUNCTIONS:
• OSCILLATE – When toggled ON, this button
causes the lift platform to enter the oscillation
zone and to oscillate up and down. When this
button is toggled OFF, or when the HOME
button is pressed, the lift platform descends to
the bottom of its travel and oscillation stops.
• PLATFORM UP/DOWN – The operator may
raise or lower the lift PLATFORM by means of
UP and DOWN pushbuttons.
• LID UP/DOWN – The operator may raise or
lower the LID by means of UP and DOWN
pushbuttons.
NOTE: The lift platform will not go up if the lid is
down. Likewise, the lid will not go down if the lift
platform is in its fully up position.