Aiphone FK1628 B P0811JZ - Manual (Page 6)

6
Cables
Cables and connectors are not included with the products.
Refer to page 7 to 11 for details about each unit connection.
Notes on cables
Pair4 Pair3
1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
Pair2
Pair1
T568A
Pair4 Pair2
Pair3
Pair1
T568B
How to connect or disconnect stranded wires.
8mm
(3/8")
Notes on CAT5e/6 cables
Do not bend the cables to an extent where the radius is •
less than 25 mm (1”). Communication failure could result.
Do not remove the CAT5e/6 cable jacket more than •
necessary.
Odd number cables, such as •
three conductor wire, cannot be
used.
Unless otherwise noted, never use individual •
conductors, twisted pair cable or coaxial cable.
CAT5e/6 cable
25mm (1") or more
Less than 25mm (1")
CAT5e/6 cable
Arrange the color code of the RJ45 connections in accordance •
with EIA/TIA-568A or 568B.
Be sure to check the condition of cable connections with a •
LAN checker before connecting with a LAN cable.
An RJ45 connector with a cover cannot be connected to the port •
for CAT5e/6 on IP master stations or IP door stations. Use a cable
without a cover.
Do not pull or put excess strain on CAT5e/6 cables. •
Use a straight-through cable for connecting units. Use a •
crossover cable when connecting with a PC directly.
e.g.) IS-IPMV (back)
Release button
Twist the strands together, then insert the • wire into one of the quick coupling terminals.
To ensure that the wire won't bend, press the release button while inserting into terminal. •