6 operating the vp-4x8, Operating the vp-4x8, Displaying unit characteristics – Kramer Electronics VP-4x8 User Manual
Page 21: 6operating the vp-4x8
18
VP-4x8 - Operating the VP-4x8
6
Operating the VP-4x8
You can operate your VP-4x8 via:
•
The front panel buttons
•
RS-232/RS-485 serial commands transmitted by a touch screen system, PC,
or other serial controller
•
The Kramer RC-IR2 Infrared Remote Control Transmitter
•
The Ethernet
6.1
19B
Displaying Unit Characteristics
The STATUS 7-segment display shows three sets of information, as shown in the
following table:
The STATUS Display
Shows:
When:
Device type:
VP-4x8
Immediately (and
automatically)
after switching on
the power
Unit
characteristics:
Firmware
version,
Machine
number
Immediately (and
automatically)
after switching on
the power
Normal
display:
Inputs
switched to the
outputs
During normal
operation,
appears a few
seconds after the
first display