Kramer Electronics VP-4x8 - Manual (Page 6)

VP-4x8 - Overview 3
3 Overview
The VP-4x8 is a high-performance, high-resolution computer graphics video
switcher. The VP-4x8 lets you simultaneously route any or all of the four inputs to
any or all of the eight outputs and to loop each input to an additional output.
The VP-4x8 4x8 VGA/UXGA Matrix Switcher features:
•
Video bandwidth of 400MHz that ensures transparent performance even in
the most critical applications
•
HDTV compatibility
•
Looping inputs
•
12 preset memory locations for quick access to common configurations
•
Delayed switching mode (ranging from 0 to 3.5 sec, in increments of 0.5sec)
for clean transitions (seamless switching) when switching between
non-genlocked sources
•
DC coupled inputs and outputs
•
Kr-isp™ advanced sync processing technology, which provides a sharp,
stable image when the sync level is too low, by restoring the sync signal
waveform
•
A TAKE button that allows you to place multiple switches in a queue and
then activate them simultaneously with one touch of this button
•
A LOCK button to prevent tampering with the front panel
•
Automatic detection of connected input signals (respective button
illuminates)
Control the VP-4x8 using the front panel buttons, or remotely via:
•
RS-485 or RS-232 serial commands transmitted by a PC, touch screen
system, or other serial controller
•
The Kramer infrared remote control transmitter
•
Ethernet
•
An external remote IR receiver (optional)