Kramer Electronics VS-162AVM - Manual (Page 44)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
MENU Commands
40
SWITCHING METHOD
changed
current:
From In #1
11.4 Choosing the Extended Keyboard Setting
Section 9.4 describes how to connect a remote keyboard. Activate or
deactivate it by setting the extended Keyboard setting ON or OFF.
To set the extended KEYBOARD mode, do the following:
1. Press the MENU button until reaching the extended Keyboard setting.
The MATRIX display shows the message:
Extended KEYBOARD setting
yes -> TAKE, next -> MENU
2. Press the TAKE button.
The displays show the messages:
Outkey 1: External keys OFF
2: External keys ON
current:
X-key ON 1
3. Press the OUT button 1 to deactivate the External keys.
The TAKE LED flashes and the displays show the messages:
Turn OFF external keys?
Press TAKE to execute
current:
X-key ON
4. Press the TAKE button.
The displays show the messages:
External Keyboard mode
changed
current:
X-key OFF
11.5 Setting the STORE/RECALL KEYBOARD Mode
Choose one of these STORE/RECALL KEYBOARD modes:
• At ONCE mode in which setups are stored/recalled immediately
without the need for user confirmation
• CONFIRM mode in which storing/recalling setups require user
confirmation. The CONFIRM mode is the default 2
1 Indicating that the external keys are currently activated
for
storing/recalling setups and is recommended to prevent
erroneously storing/recalling of setups
2 The AT ONCE mode is the default for all actions except storing/recalling setups