Kramer Electronics VS-66FW - Manual (Page 23)

Flash Memory Upgrade
19
Figure 14: RS-232 Window
6. Click Connect.
In the “ Atmel – Flip” window, in the Operations Flow column, the Run
button is active, and the name of the chip appears as the name of the third
column: T89C51RB2.
Verify that in the Buffer Information column, the “ HEX File: VS_66FW_12.hex”
appears.
Figure 15: Atmel – Flip Window (Connected)
7. Click Run.
After each stage in the operation is completed, the check-box for that stage
becomes colored green 1 .
When the operation is completed, all 4 check-boxes will be colored green and
the status bar message: Memory Verify Pass appears 2 :
1 See also the blue progress indicator on the status bar
2 If an error message: “ Not Finished” shows, click Run again