Kramer Electronics VS-88HCB - Manual (Page 24)

Operating Your VS-88HCB
21
The Confirm Mode
In the Confirm mode:
You can key-in several actions and then confirm them by pressing the
TAKE button, to simultaneously activate the multiple switches
Every action requires user confirmation, to protect against erroneous switching
Execution is delayed 1 until the user confirms the action
7.4.1 Toggling between the At Once and Confirm Modes
To toggle between the At Once and Confirm modes, do the following:
1. Press the TAKE button to toggle from the At Once mode
2 to the Confirm
mode 3 .
Actions now require user confirmation and the TAKE button illuminates.
2. Press the illuminated TAKE button to toggle from the Confirm mode back to
the At Once mode.
Actions no longer require user confirmation and the TAKE button no longer
illuminates.
7.4.2 Confirming a Switching Action
To confirm a switching action (in the Confirm mode), do the following:
1. Press an OUTPUT-INPUT combination.
The corresponding input number that is displayed in the STATUS 7-segment
Display blinks. The TAKE button also blinks.
2. Press the blinking TAKE button to confirm the action.
The corresponding input number that is displayed in the STATUS 7-segment
Display no longer blinks. The TAKE button illuminates.
To confirm several actions (in the Confirm mode), do the following:
1. Press each OUTPUT-INPUT combination in sequence.
The corresponding input numbers that are displayed in the STATUS 7-segment
Display blink. The TAKE button also blinks.
2. Press the blinking TAKE button to confirm all the actions.
The corresponding input numbers that are displayed in the STATUS 7-segment
Display no longer blink. The TAKE button illuminates.
1 Failure to press the TAKE button within one minute (the Timeout) will abort the action
2 The TAKE button does not illuminate
3 The TAKE button illuminates