Kramer Electronics VS-88HCB - Manual (Page 8)

Your VS-88HCB
5
Table 1: VS-88HCB 8x8 Component / Video / Audio Matrix Switcher Front Panel Features
# Feature Function
1 IR Receiver The red LED is illuminated when receiving signals from the Kramer
Infrared remote control transmitter
2 POWER switch Illuminated switch for turning the unit ON or OFF
3 OUTPUT SELECTOR
Buttons
Select the output to which the input is switched (from 1 to 8)
4 INPUT SELECTOR
Buttons
Select the input to switch to the output (from 1 to 8)
5 TAKE Press to toggle between the Confirm mode 1 and the At Once mode (user
confirmation per action is unnecessary), or press to confirm action
6 INPUT STATUS display Displays the selected input switched to the output (marked above each input)
7 RCL Button Press the RCL button followed by an INPUT button 2 to recall a setup from the
non-volatile memory
8 STO Button Press the STO button followed by an INPUT button 2 to store the current
settings
9 AFV Button When pressed 3 , actions relate to the video and audio channels. The audio
channels follow the video channels
10 AUDIO Button When pressed 3 , actions relate to audio
11 VIDEO Button When pressed 3 , actions relate to video
12 OFF Button An OFF-OUTPUT combination disconnects that output from the inputs; an
OFF-ALL combination disconnects all the outputs
13 ALL Button Press ALL followed by an INPUT button to connect that input to all the outputs
1 When in the Confirm mode, the TAKE button blinks
2 In this case the INPUT button corresponds to the setup address number
3 The button illuminates