Kramer Electronics WP-501 - Manual (Page 15)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Kramer K-Config Software Installation
8
2.3 Installing Kramer K-Config Software
To download Kramer K-Config 1
1. Go to
from the Internet:
http://www.kramerelectronics.com/support/downloads.asp and download the file:
“Kramer K-Config.zip” from the DOWNLOADS section.
2. Extract the file “Kramer K-Config.zip” package, which includes the
Kramer K-Config application setup and the Kramer device drivers 2
3. Install the Kramer K-Config application.
When running Setup, you are prompted to set the working directory (see
, to a folder (for example,
C:\Program Files\Kramer K-Config).
Figure 3 ):
Figure 3: Driver Database Notice
4. Click OK.
The following window appears (see Figure 4 ):
Figure 4: Setting a Working Directory
5. Select or create a new working directory 3 (see Figure 5 ).
Figure 5: Change Working Directory Window
6. Continue to run the setup according to the installation instructions.
1 File names are liable to change from time to time
2 Mostly for matrix switchers and switchers
3 The working directory will keep the information that is essential for operating the software. This information will remain unchanged while upgrading the
software