Kramer Electronics FC-10ETH - Manual (Page 24)

FC-10ETH – Flash Memory Upgrade 21
6.1.3 Upgrading the Firmware
Follow these steps to upgrade the firmware:
1. Double click the KFR-Programmer desktop icon.
The KFR-Programmer window appears (see Figure 12 ).
Figure 12: The KFR-Programmer Window
2. Select the required COM Port to which the FC-10ETH is connected on your
PC.
3. Press the File button to select the .s19 firmware file included in the package.
4. Press the Send button to download the file. The Send button lights red.
5. Wait until downloading is completed and the red Send button turns off.
6.2 Upgrading Version 2 Devices
To upgrade the firmware of Version 2 devices, refer to the K-Upload User Guide
available at http://www.kramerelectronics.com/support/product_downloads.asp .