Kramer Electronics SP-14 - Manual (Page 12)

11
Linear FRC can result in the appearance shown in the second picture where the moving parts of the
picture result in adjacent frames being merged together causing the appearance of blurring
Picture 2 Linear FRC conversion results in the moving parts of the image being blurred
The MEMC/FRC modes are pre-set to give good results on most content however, as with all motion
compensation algorithms there are occasions when the video material characteristics require
different settings. You will have to experiment with the settings to see what best suits your material.
Sports typically requires MEMC set to LOW, drama and documentaries may look better with MID or
HIGH setting. The default setting is Medium.
[MEMC/FRC Settings ]
Time Code Settings
Input Select 3G-SDI 1
Input Adjust N/A ↓
Press select, to enter the MEMC/FRC menu
Press select, use the left and right arrow keys to choose the MEMC Mode, press select
[FRC Level MEMC medium]
MEMC Exclusion Zone
MEMC Demo Mode Full Screen
Preserve Cadence On ↓