Kramer Electronics SP-14 - Manual (Page 19)

18
Choice of Audio Source
[Audio Input Select Mute]
Input Pair 1 Mute N/A
Input Pair 2 Mute N/A
.
Input Pair 3 Mute N/A ↓
In the Audio menu choose which Audio input(s) you wish to associate with your video input channel.
Choose between Mute, 3G-SDI 1, 3G-SDI 2, digital AES channels, HDMI input or Test Tone.
[Output Pair 1 from Input Pair 1] ↑
Output Pair 2 from Input Pair 2
Output Pair 3 from Input Pair 3
Output Pair 4 from Input Pair 4 ↓
Further down in this section is Audio Chanel Swap
This allows pairs of audio channels to be swapped around, particularly useful for putting local
language on the primary audio channels
[Audio Delay Offset (ms) ] ↑
HDMI Audio Input N/A
Further down in this section is Audio Delay Offset
The audio is automatically delayed by the video processing time. This allows the audio delay to be
changed to correct poor lip sync errors in the source material or to adjust for additional delays in
other parts of the system
E&OE