Kramer Electronics TP-46 - Manual (Page 18)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Connecting a Component/XGA – Audio Distribution System
16
5.3 Connecting the TP-45RC Remote Control
Connect momentary push-buttons and LEDs 1 to a cable and attach the cable
to a 5-pin terminal block for connection to the TP-45RC control port as
shown in
Figure 8 .
Each press of the selector button toggles the audio or video system mode
and turns on or off the remote and panel status LEDs according to the active
mode.
Figure 8: The TP-45RC Remote Control Connection
1 Each LED is driven by a 5V source and a 392Ω series resistor