WIKA IPT-11 - Manual (Page 15)

12 Screw the housing cover on
The electrical connection is finished.
5 .3 Wiring plan
Display
I2C
5 6 7 8
1
2
3
Fig. 8: Electronics and connection compartment
1 Spring-loaded terminals for connection to the sensor
2 Plug connector for service interface
3 Ground terminal for connection of the cable screen 1 )
1) Connect screen here. Connect ground terminal on the outside of the
housing as prescribed. The two terminals are galvanically connected.
Electronics and connec-
tion compartment
External indicating and adjustment unit 15
5 Connecting to power supply
31550
-
EN
-100726