WIKA IPT-11 - Manual (Page 23)

8 Dismounting
8 .1 Dismounting steps
Warning:
Before dismounting, be aware of dangerous process conditions such
as e.g. pressure in the vessel, high temperatures, corrosive or toxic
products etc.
Take note of chapters "Mounting" and "Connecting to power supply"
and carry out the listed steps in reverse order.
8 .2 Disposal
The external indicating and adjustment module consists of materials
which can recycled by specialised recycling companies. We have
purposely designed the electronics modules to be easily separable.
WEEE directive 2002/96/EG
This instrument is not subject to the WEEE directive 2002/96/EG and
the respective national laws (in Germany e.g. ElektroG). Pass the
instrument directly on to a specialised recycling company and do not
use the municipal collecting points. These may be used only for
privately used products according to the WEEE directive.
Correct disposal avoids negative effects to persons and environment
and ensures recycling of useful raw materials.
Materials: see chapter "Technical data"
If you have no way to dispose of the old instrument properly, please
contact us concerning return and disposal.
External indicating and adjustment unit 23
8 Dismounting
31550
-
EN
-100726