Algolith C3012-8001-200 - Manual (Page 11)

Flea
11
Operating
Flea
Input Selection
Use the Input Selection function to select between the component input and the S-Video
input.
1- Press to access the menu.
2- Press the Up or Down keys to move through the menu and access the Input
Selection command.
Input Selection Component Input Selection S-Video
3- Press to change the selected input. You will get a checker board pattern if no
video signal is present at the selected input.
4- The menu will disappear by itself after a few seconds.
Status
Use the status parameter to display the firmware version of the Flea and other
complementary information.
1- Press to access the menu.
2- Press the Up or Down keys to move through the menu and access the Status
command.
Status off
3- Press to set Status to on.
STATUS
Input Selection
Input Video Format
Color Space
Revision Number
Serial Number
720p60
1
YBR422
2.01
3014-000100
4- The menu will disappear by itself after a few seconds.