Algolith C3012-8001-200 - Manual (Page 23)

Flea
23
Technical T
utoria
„ Too high a level of filtering can blur finer details in the image.
2D filter set too high, seen a with split image. (left image unprocessed). The finer
details are lost.
Adjusting 3D Temporal Filtering
„ Generally, 3D filtering requires little adjustment and should be set to a value of about
3. If you experiment with the setting, note that a low value will work with medium and
fast moving images, while a high value will work with slow moving images. If the value
is set high on moving images, the resulting images will have «image blur» and visible
«image retention».
3D filter set too high, seen with a split image. (left image unprocessed). Image blur
can occur.