Algolith C3012-8001-200 - Manual (Page 29)

Flea
29
Tr
oubleshooting
Screen shows a color bar image:
1- The Test Pattern command is on.
The Test Pattern command needs to be set to off. (See page 14).
Stuck with a bad image:
1- Is Processing on?
Even though the Flea is on, processing of the image could have been set to off and
the source image is displayed with all of its moquito noise and blocking artifacts. Set
Processing command to on. (See Processing on page 13).
N/A - can’t modify parameters:
1- Processing is off.
When the Processing function is set to off, you cannot control or modify MNR, 2D Spatial
Filter, 3D Temporal Filter and Detail Enhancement. These parameters are «Not
Available» (N/A). To modify them, set the Processing function to on (see page 13).