Algolith C3012-8001-200 - Manual (Page 15)

Flea
15
Operating
Flea
Block Artifact Reducer
The Block Artifact Reducer function sets the level of block artifact reduction in the
image.
1- Press to access the menu.
2- Press the Up or Down keys to move through the menu and access the Block
Artifact Reducer command.
Block Artifact Reducer off
3- Press to enter the Block Artifact Reducer edit mode. Notice that 2 arrows
will appear over the menu.
Block Artifact Reducer 2
4- Press the Up or Down keys to adjust the level of filtering from 0 (off) to 4.
5- The menu will disappear by itself after a few seconds.
Note: The Block Artifact Reducer function is N/A (not available) when Processing function is set to off.