RADWAG WPT/2K 300/600H Overhead Track Scales - Manual (Page 13)

5. ASSEMBLY AND LEVELLING
5.1. Assembly of scales
A. Overhead scales
• Overhead scales are built of bearing elements and load cells as
measuring transducers. Scales are installed on a rail of a load
-bearing structure. The load cell is installed in the separated
section of the track.
• Overhead scales can be installed only by authorized services of
RADWAG. Otherwise the validity of warranty is automatically lost.
Do not introduce any mechanical stresses to the weighing system
during installation.
• It is forbidden to use any chemical agents comprising penetrators
for washing.
• The scale should be periodically cleaned from lubricants and
impurities (especially the connection between the scale rail
and the crane track).
B. Livestock scales
• Remove the transport protection if installed.
• Screw in levelling feet to mandrels placed in load cells
• Put the scale in the spot of usage on a flat stable ground.
- 13 -