RADWAG WPT/2K 300/600H Overhead Track Scales - Manual (Page 16)

5.2. Levelling the scale
A. Platform scales
After unpacking the scale should be levelled out. Use levelling legs
and the level condition indicator installed in the basis of the scale.
B. Four load cell scales
Level scale by means of turning levelling feet and external level
indicator. Put the pads under the regulation legs and observe the
level condition indicator. The instrument is levelled correctly if the
air bubble do not move more than 2mm from the central position.
Each leg can be screwed in and out in order to level the scale.
Correct levelling can be done by putting steel pads under the legs.
6. GETTING STARTED
After unpacking and mounting (chapter 5 of this manual):
• Turn the device on using the
key – keep pressing
the key for about 0.5 sec,
• Wait for the test completion,
- 16 -