RADWAG WPT/2K 300/600H Overhead Track Scales - Manual (Page 14)

C. Ramp scales
• Before setting the scale mount the steel camping ring (2) to the basis
of feet (1) using expanding ring (3) and then screw in the basis of the
foot (1) in the mandrel (4).
• Put the scale on the flat ground. Put ramps on steel clamping. Take
off ramps and mark (through the holes in clamping) places for drilling
holes for anchors. After drilling mount clamping to the ground.
5 - nut
6 - washer
7 – centring washer
8 - anchor
- 14 -