RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 23)

- 23 -
• On selecting a measuring unit press
key,
the scale returns to displaying a window:
Return to weighing with procedure of saving changes:
See point - 11.2.2. – return to weighing.
Caution:
On setting a new basic measuring unit the scale will switch on with the new
measuring unit set as default one.
12.6. Selecting an instantaneous measuring unit
The function enables setting an instantaneous measuring unit used for
indicating mass.
The measuring is active from the moment of its selection until it is changed
or the scale is switched off and on.
Procedure:
• Press
key, and: