RADWAG WPT/8B 300C Ramps Bed Scales - Manual (Page 37)

- 37 -
5. After scale’s automatic switch off repeat the forming process twice by
acting as specified in points 1 to 4 above.
The forming process enables obtaining optimum capacity of the
accumulators.
16. WORKING MODES
Medical scales, while in weighing mode have two working modes, which
are enabled on pressing of key:
• Weighing with peak hold (lock of measurement result on the display
(hoLd)
• Determining BMI factor.
16.1. Means of selecting a working mode
On changing – selecting a working mode, the scale displays name of the
working mode for approximately 1 second. The software stores data on
recently used working mode, and it is displayed as the first one on next
pressing of key.
Procedure:
16.2. Weighing with lock of measurement result on the display - hoLd
While in weighing mode press key and select working mode hoLd.
On enabling the mode, the user should set its operation parameters. The
display automatically previews the first of available options.