Asante Technologies 8000 - Manual (Page 102)

Advanced Management
Page 4-12
similar to Figure 4-4.
Figure 4-4 Duplicated IP address list
Enabling and Disabling Station Movement Trap
The station movement trap security measure ensures that when any end
station is moved from one switch port to another, an alert is sent to the
designated trap receiver. Station movement is detected when a station’s
MAC address (already learned by the switch) appears on a different switch
port. The station movement trap includes the station’s MAC address and IP
address (if available) and the switch’s port numbers.
By default, station movement trap is disabled.
To enable or disable detection of the movement of a station on the IntraCore
8000:
1
From the Configuration Menu, type t to access the Secu-
rity Management Menu.
2
Type s to toggle station movement trap.
Duplicated-IP List
+---------------+------------------+-+-+-------------------+-+-+
| IP Address | Owner MAC |M|P| Spoofer MAC |M|P|
+---------------+------------------+-+-+-------------------+-+-+
192.203.54.222 00:00:94:00:00:01 1 1 00:00:94:00:00:02 1 2
192.203.54.223 00:00:94:00:00:04 1 3 00:00:94:00:00:02 1 2
192.203.54.224 00:00:94:00:00:05 1 4 00:00:94:00:00:02 1 2
Press <q> to Quit, or, press any key to continue...