Asante Technologies 8000 - Manual (Page 120)

Advanced Management
Page 4-30
Deleting Port Members
To delete ports as members of the VLAN, from the VLAN Group Static
Configuration Menu, type d. Follow the instructions on the screen to enter
the modules and ports to assign to the VLAN. Deleting a port from a VLAN
does not affect the port’s status on any other VLAN.
Moving Ports to This VLAN
To move ports to this VLAN, from the VLAN Group Static Configuration
Menu, type m. Follow the instructions on the screen to enter the modules
and ports to assign to the VLAN. Moving a port to a VLAN removes that
port from any other VLAN on the switch.
Advanced Static VLAN Configuration
To access the Advanced Group Static Configuration Menu, type v in the
VLAN Group Static Configuration Menu. A screen similar to Figure 4-8
appears.
Figure 4-9 Advanced Group Static Configuration Menu
IntraCore 8000 Advanced Group Static Config. Menu VLAN Index: [01]
Module Port List 1 8 9 16 17 24 25 32
====== ======== ======== ======== ========
1 +: static ++++++++ ++++++++ ++++++++ XXXXXXXX
2 d: dynamic ++++++++ ++++++++ ++++++++ XXXXXXXX
3 -: Not Member ++XXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
4
5
6
7
8
VID: 0001 Created By: Mgmt Name: Default VLAN
FID: 0000 Mgm Access: Enable Status: Active, Independent
<Cmd> <Description> <Cmd> <Description>
a Add Untagged Ports d Delete Untagged Ports
v Share This VLAN i Make This VLAN Independent
m Insert MAC Addr r Remove MAC Addr
Command>
Select VLAN Next VLAN Prev VLAN Help Quit