Asante Technologies 8000 - Manual (Page 151)

Span Tree (Spanning Tree) Button
Page 5-11
Span Tree (Spanning Tree) Button
This button opens the Spanning Tree Protocol (STP) Configuration page,
which shows the STP Configuration of the IntraCore, as shown in Figure 5-
9. STP configuration is explained in Chapter 4, “Advanced Management.”
Click the STP Port Configuration button to display the STP Configuration
settings for each port.
Figure 5-9 Spanning Tree Configuration page
I Important: Do NOT configure any STP parameters
unless you have knowledge of and experience with the
IEEE 802.1d specification.