Cirrus Logic CS2000-CP - Manual (Page 7)

CS2000-CP
DS761F2 7
3. CHARACTERISTICS AND SPECIFICATIONS
RECOMMENDED OPERATING CONDITIONS
GND = 0 V; all voltages with respect to ground. ( Note 1 )
Notes: 1. Device functionality is not guaranteed or implied outside of these limits. Operation outside of these limits
may adversely affect device reliability.
ABSOLUTE MAXIMUM RATINGS
GND = 0 V; all voltages with respect to ground.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Notes: 2. The maximum over/under voltage is limited by the input current except on the power supply pin.
DC ELECTRICAL CHARACTERISTICS
Test Conditions (unless otherwise specified): VD = 3.1 V to 3.5 V; T
A
= -10°C to +70°C (Commercial Grade);
T
A
= -40°C to +85°C (Automotive Grade).
Notes: 3. To calculate the additional current consumption due to loading (per output pin), multiply clock output
frequency by load capacitance and power supply voltage.
For example,
f
CLK_OUT
(49.152 MHz) * C
L
(15 pF) * VD (3.3 V) = 2.4 mA of additional current due to
these loading conditions on CLK_OUT.
Parameters Symbol Min Typ Max Units
DC Power Supply VD 3.1 3.3 3.5 V
Ambient Operating Temperature (Power Applied)
Commercial Grade
Automotive Grade
T
AC
T
AD
-10
-40 -
- +70
+85 °C
°C
Parameters Symbol Min Max Units
DC Power Supply VD -0.3 6.0 V
Input Current I
IN
- ±10 mA
Digital Input Voltage ( Note 2 ) V
IN
-0.3 VD + 0.4 V
Ambient Operating Temperature (Power Applied) T
A
-55 125 °C
Storage Temperature T
stg
-65 150 °C
Parameters Symbol Min Typ Max Units
Power Supply Current - Unloaded ( Note 3 ) I
D
- 12 18 mA
Power Dissipation - Unloaded ( Note 3 ) P
D
- 40 60 mW
Input Leakage Current I
IN
- - ±10 µA
Input Capacitance I
C
- 8 - pF
High-Level Input Voltage V
IH
70% - - VD
Low-Level Input Voltage V
IL
- - 30% VD
High-Level Output Voltage (I
OH
= -1.2 mA) V
OH
80% - - VD
Low-Level Output Voltage (I
OH
= 1.2 mA) V
OL
- - 20% VD