4 self-testing cdb5376, 1 noise test, Cdb5376 – Cirrus Logic CDB5376 User Manual
Page 13
Advertising
CDB5376
DS612DB3
13
1.4
Self-testing CDB5376
Noise and distortion self-tests can be performed once hardware and software setup are complete.
First, initialize the CDB5376 evaluation system:
• Launch the evaluation software and apply power to CDB5376.
• Click ‘OK’ on the About panel to get to the Setup panel.
• On the Setup panel, select Open Target on the USB Port sub-panel.
• When connected, the Board Name and MCU code version will be displayed.
1.4.1
Noise test
Noise performance of the measurement channel can be tested as follows:
• Set the controls on the Setup panel to match the picture:
Advertising