Acer 500L - Manual (Page 69)

Chapter 3 BIOS Utility 3-23
Boot Options
This option allows you to specify your preferred setting for bootup.
The following screen appears if you select Boot Options from the
Basic Configuration menu:
Boot Options
Boot Sequence
1
st [Floppy Disk]
2 nd [Hard Disk ]
3 rd [IDE CD-ROM ]
First Hard Disk Drive ................. [ IDE]
Fast Boot ............................. [Auto]
Silent Boot ........................... [Enabled]
Num Lock After Boot ................... [Enabled]
Memory Test ........................... [Enabled]
*Configuration Table ................... [Enabled]
Boot from LanDesk Service Agent ....... [Disabled]
The above parameter marked with ‘*’ will only
appear if you access the advanced configuration
level in the Main Menu. Please refer to the
Entering Setup section at the beginning of this
chapter for more information.
Boot Sequence
This parameter allows you to specify the boot search sequence during
POST.
•
1 st . The system checks this drive first.
•
2 nd . The system then checks this drive if it can not boot from the
1 st specified drive.