Acer 500L - Manual (Page 56)

3-10 AcerAltos 500L User’s Guide
Disk Drives
Select Disk Drives to input configuration values for disk drives.
The following screen shows the Disk Drives menu:
Disk Drives
Diskette Drive A ....................... [xx-MB, xx-inch]
Diskette Drive B ....................... [ None ]
LS-120 Drive as ........................ [ Normal ]
•
IDE Primary Channel Master
•
IDE Primary Channel Slave
•
IDE Secondary Channel Master
•
IDE Secondary Channel Slave
Floppy Drives
To enter the configuration value for the first floppy drive (drive A),
highlight the Floppy Drive A parameter. Press
or to view the
options and select the appropriate value.
Possible settings for the Floppy Drive parameters are:
•
[ None ]
•
[360 KB, 5.25-inch]
•
[1.2 MB, 5.25-inch]
•
[720 KB, 3.5-inch]
•
[1.44 MB, 3.5-inch]
•
[2.88 MB, 3.5-inch]
Follow the same procedure to configure floppy drive B. Choose None
if you do not have a second floppy drive.