System security, Setup password – Acer 500L User Manual
Page 74
3-28
AcerAltos 500L User’s Guide
System Security
The Setup program has a number of security features to prevent
unauthorized access to the system and its data.
The following screen appears if you select System Security from the
Main menu:
System Security
Setup Password .................. [None]
Power-on Password ............... [None]
Operation Mode ................ [Normal]
Disk Drive Control
Floppy Drive .................. [Normal]
Hard Disk Drive ............... [Normal]
Setup Password
The Setup Password prevents unauthorized access to the BIOS utility.
To set or change a Password:
1.
Make sure that JP3 is set to 2-3 (bypass password). See
Jumpers and Connectors for the location of JP3.
You cannot enter the BIOS utility if a Setup
password does not exist and JP3 is set to 1-2
(check password).
By default, JP3 is set to 2-3 (bypass password).
2. Enable the Setup Password parameter in the System Security
menu by pressing
or
. The Setup Password window
appears: