4 self-testing cdb5374, 1 noise test, Cdb5374 – Cirrus Logic CDB5374 User Manual
Page 11
Advertising
CDB5374
DS862DB1
11
1.4
Self-testing CDB5374
Noise and distortion self-tests can be performed once hardware and software setup are complete.
First, initialize the CDB5374 evaluation system:
• Launch the evaluation software and apply power to CDB5374.
• Click ‘OK’ on the About panel to get to the Setup panel.
• On the Setup panel, select Open Target on the USB Port sub-panel.
• When connected, the Board Name and MCU code version will be displayed.
1.4.1
Noise test
Noise performance of the measurement channel can be tested as follows:
• Set the controls on the Setup panel to match the picture:
Advertising