Cirrus Logic CDB5374 - Manual (Page 5)

CDB5374
DS862DB1 5
1. INITIAL SETUP
1.1 Kit Contents
The CDB5374 evaluation kit includes:
• CDB5374 Evaluation Board
• USB Cable (A to B)
• Software Download Information Card
The following are required to operate CDB5374, and are not included:
• Bipolar Power Supply with Banana Jack Outputs (+/-12 V @ 300 mA)
• Banana Jack Cables (4x)
• PC Running Windows 2000 or XP with an Available USB Port
• Internet Access to Download the Evaluation Software
1.2 Hardware Setup
To set up the CDB5374 evaluation board:
• Set all jumpers and DIP switches to their default settings (see next sections).
• With power off, connect the CDB5374 power inputs to the power supply outputs.
VA- = -12 V
VA+ = +12 V
GND = 0 V
VD = +12 V
• Connect the USB cable between the CDB5374 USB connector and the PC USB port.
• Proceed to the Software Setup section to install the evaluation software and USB driver.