Warning – Alliance Laundry Systems H264I User Manual
Page 28
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
801480
26
Step 6: Start Washer
After vend price has been satisfied, push the START
pad. DOOR MUST BE CLOSED TO START
WASHER.
Figure 29
Indicator Lights
WASH
WASH is lit at the beginning of a wash cycle and will
remain lit until the wash cycle is complete.
RINSE
RINSE is lit at the beginning of all RINSE cycles and
will remain lit until the rinse cycle is complete.
SPIN
SPIN is lit for all spin cycles.
DOOR LOCKED
DOOR LOCKED is lit whenever the door is locked.
The door cannot be opened when this light is on.
IMPORTANT: If washer fails to operate properly
after installation, make sure electrical service and
water supply faucets are turned on. Are all the
controls properly set? Have a qualified
serviceperson refer to the wiring diagram (located
inside of washer control hood) and check for
broken, loose or incorrect wiring.
NOTE: Once a cycle has started, the door can only
be opened by first unplugging the power cord and
waiting one minute.
FLW1923N
FLW19
To reduce the risk of bodily injury, do not
remove laundry from washer until all
lights are out, and all moving parts have
stopped.
W092
WARNING