Caution, Step 3: add laundry supplies, Step 4: set fabric selector – Alliance Laundry Systems H264I User Manual

Page 30: Step 5: set wash temperature

Advertising
background image

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

Operation

801480

28

Step 3: Add Laundry Supplies

Open dispenser drawer. Measure and add low sudsing
detergent (1), bleach (2) and fabric softener (3) to the
dispenser drawer (refer to Figure 32). Close dispenser
drawer.

IMPORTANT: If using detergents made for
topload washers, avoid oversudsing by using 1/2 of
the recommended amount.

Figure 32

Step 4: Set Fabric Selector

Push touchpad for NORMAL, PERM PRESS or
DELICATES cycle. Light indicates selection.

NOTE: Changes can be made to Fabric Selector
setting up until the first fill is complete.

Figure 33

Step 5: Set Wash Temperature

Push touchpad for HOT, WARM or COLD. Light
indicates selection.

NOTE: Always follow manufacturer’s care labels.

Figure 34

H284I

1

Detergent

2

Bleach

3

Fabric Softener

3

2

1

Dispenser drawer requires a special tool
for removal. Contact a service person if
removal is necessary.

W236

CAUTION

H199I

H200I

H199I

H200I

Advertising