EasyN F Series User manual - Manual (Page 17)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
16
3.4.9. DDNS Settings
All of the above information has been set up when the device is ready. Users
generally do not need to make changes. In case of any accidental loss of information,
user will need to re-obtain the domain name and fill it in himself. The user’s name is
just the first four characters of the remote access. For example, if the IP address is http:
//abcd.ipcam.hk, the user’s name is abcd. The password is DDNS. (The password can
be obtained from the device body or through contacting the supplier). When
connected, it displays "xxxxx is OK" on DDNS state; it means that the settings have
been successfully set. If you need to use your own Dynamic DNS, please select the
appropriate service providers (on DDNS service) then enter the appropriate
information, and then save it.
3.4.10. SMTP Settings
The above settings are for the alarm function, enter the sender’s email address
under sender, and recipient’s email address(es) under receiver 1,2,3,4. SMTP server
should be filled in with the SMTP server of the email of the sender，for example the