EasyN F Series User manual - Manual (Page 8)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
7
2.2.3. IP Camera & PC connection
This method is not used frequently. If you process machine write parameter or
program shift, we suggest you to use the first method to connect to the network to
modify the machine parameter.
Connect power to IP camera (note: make sure it is the correct power), video
should be connected via internet cable to IP camera in a minute after the
modification. Under the normal condition, the yellow light is on and green light
flickers when the IP camera is connected.
(In order to connect successfully, we advise you to set the camera’s IP as the stable
IP at the same net range of your PC in LAN. Please refer to 8. Frequent asked
questions on how to set camera IP as the stable IP at the same net range of PC in
LAN).