EasyN F Series User manual - Manual (Page 7)

English EasyN IP Camera User Manual
www.easyn.com MFE-E-A3
6
2.2. Installation
An IP camera processes image transmission on the network through the use of
Internet technology, which offers DDNS function for static IP, dynamic IP and PPPoE
dialing users. IP Camera can connect to outer net through LAN, which can also be
connected directly.
There are 3 commonly used network connections in IP Camera:
2.2.1. Installation in LAN.
This is the most popular method for network access as long as there is a router.
Connect internet cable to the router, and then connect the IP camera the same way as a
PC, as shown in the following picture:
2.2.2. PPPoE Installation
Under this circumstance, users need to set up a PPPoE dialing parameter in the
IP Camera: input the username and password provided by ISP supplier, this will
allow the IP Camera to connect to internet by dialing connects. As for setting the
PPPoE dialing parameter, you can connect the device to network through the first
method, and then write the parameter to the device, or through the following third
method which directly writes process parameter to the device. Please refer to 3.4.5.for
detailed steps on how to set up PPPoE