An antenna pattern data selection, Confidential – KMW Communications AICM User Manual
Page 13
Advertising
Sheet 13 of 17
Sheet 13 of 17 05-30-2006
CONFIDENTIAL
Antenna Control
<Figure 7-1> An Antenna Control window
8. An Antenna pattern data selection
When the user points to the Set Pattern Data menu of Figure 8-1, and a dialog box appears (Figure 8-2). The user can
select a pattern information file that is matched to each antenna. There are pattern files for EDTA, Hybrid 2Way, 3
Column and Hybrid 3Way up to now.
The Set Control Data menu of Figure 8-1 is not necessary for the installation.
<Figure 8-1> A Set Pattern Data Menu
Select a pattern data file from the file open dialog box
<Figure 8-2> A Data File Selection window
Copyright © 2006 KMW Inc., All Rights Reserved
Advertising