KMW Communications AICM - Manual (Page 9)

Sheet 9 of 17 Sheet 9 of 17 05-30-2006
CONFIDENTIAL
Antenna information per sector: Antenna formats are selectively displayed according to the types of
antenna installed. There are 4 different types of antenna (Tilting#1, Tilting#2, Steering, and Width). The
type and the model are defined in Table 1. A related antenna control button will be activated.
Ant. Install LED: A blue LED turns on when an antenna was installed at each sector. If not installed, the
LED turns off.
Motor Busy LED: A yellow LED turns on when the program receives a motor busy message from AICM,
that is, the motor is currently running.
Motor Alarm LED: A red LED turns on when a motor runs and some errors occur. A green LED turns on
for a normal case.
<Figure 5-2> A Tool bar
3) Tool bar: This is a shotcut for the Menu function.
a. Set Pattern Data:
b. Port Set:
This is for the Serial Port setting, but the initial setting is fitted to the protocol after the program
installation. Refer to Figure 5-3.
c. Port Open:
This is for the Serial Port open, the default setting is OPEN state.
d. Port Close:
This is for the Serial Port close.
e. Console (Data Log):
It displays the data TX/RX status. Refer to Figure 5-4.
f. Download:
g. Input:
h. Set Device:
i. Set GMT Time:
j. About:
<Figure 5-3> A Port Properties window
Copyright © 2006 KMW Inc., All Rights Reserved