MSI RS480M2 - Manual (Page 41)

3-10
MS-7093 M-ATX Mainboard
MPS Version Control For OS
This field allows you to select which MPS (Multi-Processor Specification) version to
be used for the operating system. You need to select the MPS version supported by
your operating system. To find out which version to use, consult the vendor of your
operating system. Settings: [1.4], [1.1].
OS Select for DRAM > 64MB
This allows you to run the OS/2
® operating system with DRAM larger than 64MB.
W hen you choose [Non-OS2], you cannot run the OS/2 ® operating system with
DRAM larger than 64MB. Settings: [OS2], [Non-OS2].
HDD S.M.A.R.T. Capability
This allows you to activate the S.M.A.R.T. (Self-Monitoring Analysis & Reporting
Technology) capability for the hard disks. S.M.A.R.T is a utility that monitors your disk
status to predict hard disk failure. This gives you an opportunity to move data from a
hard disk that is going to fail to a safe place before the hard disk becomes offline.
Settings: [Enabled] and [Disabled].
Full Screen LOGO Show
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled] Shows a still image (logo) on the full screen at boot.
[Disabled] Shows the POST messages at boot.