Using 2-, 4- & 6- channel audio function – MSI RS480M2 User Manual
Page 87
A-13
Using Audio Function
In addition to a default 2-channel analog audio output function, the audio
connectors on the Back Panel also provide 4- or 6-channel analog audio output
function if a proper setting is made in the software utility.
Read the following steps to have the Multi-Channel Audio Function properly set
in the software utility, and have your speakers correctly connected to the Back
Panel.
Connecting the Speakers
W hen you have set the Multi-Channel Audio Function mode properly in the
software utility, connect your speakers to the correct phone jacks in accord-
ance with the setting in software configuration.
n 2-Channel Mode for Stereo-Speaker Output
Refer to the following diagram and caption for the function of each phone
jack on the back panel when 2-Channel Mode is selected.
1
MIC
2
Line In
3
Line Out (Front channels)
Back Panel
2
3
1
Using 2-, 4- & 6- Channel Audio Function