Connectors, Hard disk connector: ideb0, Important – MSI Keeper 945GME V2.1 User Manual
Page 23: Compact flash card slot: cf0
2-11
Hardware Setup
Connectors
IDEB0 (Primary IDE Connector)
IDE1 can connect a Master and a Slave drive. You must configure the second
hard drive to Slave mode by setting the jumper accordingly.
Hard Disk Connector: IDEB0
The mainboard provides a one-channel Ultra ATA 100 bus Master IDE controller that
supports PIO mode 0~4, Bus Master, and Ultra DMA 66/100 function. You can con-
nect hard disk drives, CD-ROM drives and other IDE devices.
IDEB0
IDE
UDMA
Controller
RAID
ATAPI
1
66/100
Intel ICH7/ICH7R
N/A
Yes
IDE1 Definition
Important
If you install two hard disks on cable, you must configure the second drive to
Slave mode by setting its jumper. Refer to the hard disk documentation
supplied by hard disk vendors for jumper setting instructions.
Compact Flash Card Slot: CF0
This is the slot for Type II Compact Flash (CF) Card.
CF0
PDF created with pdfFactory Pro trial versi